Anyone wants their house to be safe and secure and safety starts with the roof. Usually, roofing materials are made to withstand harsh weather conditions and their lifespan is of 20 to 30 years. Roofs will wear out or get damaged sooner or later and the replacement of the roof will cost you a thousand dollars if you are getting it done professionally. There is nothing to worry because if you have the right material, planning and precautions you will be able to re-roof your house safely at a low cost. Here are some important steps that you might find useful when replacing the roof.
The first step is to decide what type of roof you want to install. There are different types of roofs which you can search online or ask a roof mechanic and decide what you prefer the most. Then you need to decide on the material that you are planning to complete the job with. Roofing material depends on the roof type and the quantity needed will depend on the surface area of the roof. Higher a roof mechanic to replace the roof with a new roof Sydney. The old roof has to be removed first. The old roofing material has to be loosened by tools such as a shovel, square nose spade or a special scraper. Before you install a roof to replace and repair the damaged areas of the plywood decking.
Prepare the roof.
Purchase all the necessary materials for proper reroofing. Take the right safety precautions. Make sure that you wear rubber-soled boots when working on the roof also wear glasses and gloves. Remove the shingles and clean the roof. It is important that you install an ice and water barrier if you want to prevent any ice or water cluttering on the roof. For further protection, you may also add flashing to the roof. They can be applied around the vents or other areas to prevent damage caused by water and apply plastic roofing cement to these areas. Lay the first row of shingles over the starter shingles in a way the ends of the shingles to join. Then lay the second layer of shingles over the first layer in the same basic manner especially fitting the gaps that were left by the first layer.
Maintain the roof.
Once a year do a thorough inspection of the roof. Check for cracks or damages on the flashing and re-caulk the affected areas. The edges of the shingles could start to curl up or blister look for the curling shingles and use roofing nails to secure them.